Cabinet shop software

Kabinetz Beta

Kabinetz home
Saved locally

Job

Job setup

Access

G-code unlock status

Backup

Export / import this job

Save the whole job to a Cabinetz .bryce file you can email, archive, or restore later. Legacy .json job backups can still be imported.

Flow

Stages

1. Job SetupName, address, and job-specific notes.
2. SettingsMaterials, hardware, door style, and defaults.
3. RoomWalls, openings, electrical, plumbing, and watch-outs.
4. ProductsCabinets, drawers, doors, and fronts placed into rooms.
5. BuilderBuild cabinet templates and prep shop-ready production output.
6. CutlistShop-ready parts grouped for cutting.

Defaults

Job settings

Build

Basic Sizes Cabinet heights and finished depths

Exposed ends

Room

Room layout

Wall draw: Click Draw Walls, left-click points to add connected walls, right-click to stop. Double-click a wall to flip its cabinet side; triple-click it to allow cabinets on both sides.

Walls

Adjust lengths

Wall Length Angle Cabinet side

No walls drawn yet.

Fixtures

In this room

No fixtures added yet. Pick appliances, windows, or doors from the library on the right.

    Products

    Place cabinets in room

    Room

    Draw walls first to place cabinets against them.

    Selected Cabinet

    Cabinet readout

    Select a cabinet Library item details appear here.
    Size
    Shop estimate $0.00
    Position
    Identity

    Fabrication

    Cabinet builder

    Build cabinet templates for production.

    Build kit

    Cabinet creator

    Room Viewer

    3D render

    Place cabinets in Products to preview the room.

    Doors / fronts

    Door Schedule

    Current cabinet-door setup

    Choose when production begins

    Door production path

    The saved Cutting setting marks the preferred path. You can still change the cut method inside Generate Cutlist when the job reaches production.

    Additional production

    Additional door batches

    Add doors that are not tied to a cabinet carcass. Each batch keeps its own construction method and materials.

    Pick a category and enter the opening sizes you measured.

    Manual list

    Review additional batches

    Category Label Qty Openings Entered Generated Doors Production

    No additional door batches yet.

    Cabinet + additional

    Unified Door Schedule

    Beta verification is recorded as pending for now. Use this schedule to tape-check the calculated openings before final production.

    Source Door / front Opening Finished each Qty Construction Material Verification

    No doors or fronts are scheduled yet.

    Tape check

    Verify opening

    Parts

    System cutlist

    Source

    Using doors generated from placed cabinets.

    Placed-cabinet preflight Checking cabinet recipes and materials...
    Part Material Room Size Qty Source

    Add a door to generate parts.

    Face frames

    Crosscut list

    Matching lengths are combined across the whole job. Cut longest first.

    Cut Used for

    No face-frame parts in this cutlist source.

    Piece-by-piece cabinet breakdown
    Cabinet Part Size Qty

    Doors / fronts

    Door / drawer face setup

    Door face

    Size

    Members

    Joinery

    Stretch test

    Preview

    Settings apply to this job.

    Account

    Shop account

    Master rules

    Master defaults

    These are your shop's standards. Every new cabinet starts from here unless someone explicitly overrides a field at the job or cabinet level.

    Box construction

    Toe kick

    Applied ends

    Materials

    Account

    Profile

    Job overrides

    Job cabinet settings

    These are shop defaults. A cabinet can still override top build to use a full top panel.

    Doors

    Door rules

    Toe kicks

    Toe kick rules

    Moved into box design: Toe kick height, setback, and construction now live under Job cabinet settings > End caps.
    Applied to carcasses: Update placed cabinets after changing these rules to refresh cabinets already in the room.

    Dados

    Dado rules

    Applicable to all

    Simple dado setup

    Advanced dado map Per-location overrides and qualified tenons live here.

    Dado depths

    Back dados

    Blind dados

    Slop and qualified tenons

    Applied to carcasses: Simple settings are saved with cabinet parameters and included in generated carcass notes.

    Materials

    Sheet materials

    Materials

    Hardware

    Materials

    Wood

    Materials

    Miscellaneous

    These are internal shop-cost defaults. They do not add markup or client quote pricing.

    CNC

    Machine setup

    CNC

    Post processor

    Status Imported

    Cabinetz supports machines by controller dialect through built-in and shop-approved post templates. Imported manufacturer posts are parsed only when their sections and tokens match Cabinetz support.

    If a machine is not supported yet, prepare a support packet after importing the shop's post file. Kabinetz support can review the packet and use it to build or update a Cabinetz-owned controller template.

    CNC

    Profile setup

    Recipes

    Recipe stages

    Profile recipe

    Tooling defines loaded bits. Profile setup defines the ordered recipe that uses those bits for shaker door cuts.

    CNC

    Tooling

    Tool library: T3 3/8" Compression for cutouts at F540/P270. T8 1/2" Compression for dados at F360/P180. T2 1/4" Downshear for smaller work.

    Account

    Preferences

    Company

    Company profile

    Save scope: Use room for one room, job for this file, or universal when these should become your normal shop defaults.
    Changes are saved locally as you edit.

    Save scope

    Where should these parameter changes apply?

    Choose a save scope before closing the parameter window.

    Cabinet builder

    Box parameters

    These settings apply to this cabinet only.

    Changes are saved to this cabinet as you edit.

    Material CNC

    Material setup

    Hardware library

    Add hardware item

    Hinge drilling

    Door-side cup operation

    Back face
    Wood door hinge layout Match the manual dimensions before plotting hinge drill points Application side view Material gap S Plate height H Plate setback D Clearance A Bore distance K Cup offset L Door material T H = 1 + K - D cabinet side door leaf Cup drilling view 35 hinge edge Bore distance K Cup diameter S and T come from selected materials. The other labeled parameters are the hinge and mounting-plate values to match from instructions.

    Copy from the manual

    • Cup diameter35 mm
    • Cup depth9 mm
    • K range3-18 mm
    • Opening110 deg

    Operation plan: Hinge cups are saved as back-face drilling features. The manual will tune the exact hinge-family questions and allowed ranges.

    Nesting

    Generate cutlist

    Tablesaw rule: Rip bands first, fill smaller pieces into that band, and rotate parts when it saves sheet space.
    Tooling Account CNC tool
    Output .tap ready
    Next Profiles, then drilling ops
    CNC toolpaths Outside-profile preview and TAP export from the Account CNC setup.
    Confirm material size and source, then generate the rip layout.

    PDF export

    Shop packet

    Full shop packet: Landscape, multi-page export containing the parts table and detailed rip, label, remnant, and crosscut instructions.

    Placed-cabinet preflight

    Review intentional differences

    Part editor

    Edit Part

    Product Editor

    Sink Base

    3D

    Cabinet carcass

    Shape

    Cabinet envelope

    Face

    Front layout

    Live carcass: Two sides, bottom, full back, toe kick, and two top stretchers update in the Products table and 3D render.

    Cabinet recipe

    Generated parts

    Parts update with this product.

    Material choices apply to every generated part with the same role.

    Part Dimensions Material Role Treatment

    Part inspector

    Part shape

    Part size appears here.

    Changes are saved locally as you edit.